Last month I ordered a battery load tester at a perfect source but now this shop online doesn’t work. Please, help me anybody to find a nice shop online with this sort of stuff? Thanks for the help!

Go there: http://seerch.com/category/1727/Battery-and-Alternator-Load-Testers/ . I bought my a battery load tester here.

I recently (2 months ago)) bought a 1990 Holden Commodore VN to drive around Australia. After 10,000km (Melbourne to Cooktown then to Alice Springs via Tennant Creek), the battery warning light sometimes switches on. The car starts first time, every time, and my friend’s battery charger/tester tells me the battery is in good condition. Any ideas.???

The battery light measures your charging system, ie. your alternator. Likely the alternator output is weak.

I was going to use a piece of wire instead of the fuse if it’s safe enough. Is it really possible that one AA battery is powerful enough to start a fire if I use the battery tester without the fuse?

Fuses are fitted to devices for very good reasons and should always be replaced with one of the correct rating.

Never replace a fuse with a bit of wire or foil.

I’m trying to find a parasitic drain on my battery. The article I’m reading said I need one of these. Is this the same as a multimeter? I searched for it and got various responses. Can you find one and post a link. I’m trying to trouble shoot a 99 crappy VW jetta. Notorious for electrical problems.

try 19-Range Analog Multimeter http://www.amazon.com/gp/product/B0035KHFS2?ie=UTF8&tag=digitsy-marina-20&linkCode=as2&camp=1789&creative=390957&creativeASIN=B0035KHFS2 or see more
http://www.amazon.com/gp/redirect.html?ie=UTF8&location=http%3A%2F%2Fwww.amazon.com%2Fs%3Fie%3DUTF8%26x%3D14%26ref_%3Dnb%5Fsb%5Fnoss%26y%3D17%26field-keywords%3Dbattery%2520tester%2520%26url%3Dsearch-alias%253Daps&tag=digitsy-marina-20&linkCode=ur2&camp=1789&creative=390957

I have just bought an Exide/Midtronics EBT-155 Plus Electronic Battery Tester. I have worked out how to use it by using the manual from the similar PBT-200 tester but there are some functions that I don’t know how to use.

If you have a manual, quick reference card or instructions for the 155+ could you scan and email them to me. If you know an on-line resource I can use, that would be even better. I have tried Google and the Midtronics and Exide websites without success.

I know what most of the LED readings mean, they are self explanatory, but what does it mean when one of the coloured indicator lights (Red, amber, green) is flashing?

Thanks.

Contact the company direct and get the details,also for a few dollars give them the model # and they will be more than glad to send you a manual . I have lost or misplaced manuals and have done the above.

I am testing a rc90 werker battery. I have been using the dcv setting at 50. please help me. this battery cant be dead and needing to replaced already.

The battery should hold at least 10 volts for ten seconds under a load test.

If I can I would rather run my own diagnostics on my ignition and starter system without paying a mech ten times the price of the device you catch my drift?

Go to harbor freight. Most of their stuff is throw away junk, I know. But the battery tester I got there has been working for 10 years and I only paid like 15 or 20 for it.

Toronto, Canada - offers its handheld  (GAO5853) with built-in NiMH rechargeable batteries and smart charger circuitry. The BER tester is an advanced test instrument used for E1 PCM line access, maintenance, inspection and acceptance testing. It has been extensively deployed in R&D, production, installation and maintenance of SDH, PDH and DATA protocol conversion.

The E1 BER tester supports out-of-service framed and unframed testing; it also offers BER testing, alarm analysis and signal analysis. The easy-to-use tester conducts clock slip measurement, frequency and level measurement as well as manual and auto-timer measurement. The tester has real-time transmission circuit open/shot indication. It works continuously for up to six hours on a single charge and can be charged with an automobile battery adapter. The E1 BER tester uploads, saves and prints test results for analysis via TestManagerPro?? software.

For more information about this , please visit or contact

About GAO Tek Inc.

GAO Tek Inc. is a leading provider of test and measurement equipment, telecommunication testers, electronic measurement instruments, embedded development tools and other electronic products that serve the needs of electronic professionals internationally.

GAO Tek Inc. is a leading provider of test and measurement equipment, telecommunication testers, electronic measurement instruments, embedded development tools and other electronic products that serve the needs of electronic professionals internationally.GAO Tek Inc. is a leading provider of test and measurement equipment, telecommunication testers, electronic measurement instruments, embedded development tools and other electronic products that serve the needs of electronic professionals internationally.GAO Tek Inc. is a leading provider of test and measurement equipment, telecommunication testers, electronic measurement instruments, embedded development tools and other electronic products that serve the needs of electronic professionals internationally.GAO Tek Inc. is a leading provider of test and measurement equipment, telecommunication testers, electronic measurement instruments, embedded development tools and other electronic products that serve the needs of electronic professionals internationally.GAO Tek Inc. is a leading provider of test and measurement equipment, telecommunication testers, electronic measurement instruments, embedded development tools and other electronic products that serve the needs of electronic professionals internationally.

Gao Comm

Toronto, Canada – GAO Comm (www.GAOComm.com) has launched its full-featured digital transmission system test device – E1/Datacom tester featuring a handheld design, smart navigation mode display and high resolution backlight LCD. This datacom tester is designed for the installation, testing, acceptance and daily maintenance of digital networks and is able to perform channel tests, alarm analysis, fault location and signal analysis. In addition, this tester provides various protocol converters with one-way and bi-directional bit-error-rate (BER) test functions. These capabilities make it ideal for field use.
This portable E1/datacom tester, model 5854, offers a number of practical functions such as frame data control and monitoring, time slot activity monitoring, handshaking signal control and monitoring, APS delay measurements and frequency measurements. Equipped with built-in NiMH rechargeable batteries and a smart charger circuit, the multifunctional tester can work continuously for up to six hours on a single charge and is charged with an automobile battery adapter. It saves and recalls up to 10 user-defined setups and 10 sets of results. Its software is easily upgraded via an integrated RS232C interface. Test results can be uploaded, conserved and printed using Test Manager Software.
Please visit http://www.GAOComm.com for more information or purchase this product online.
For any sales inquires please contact:
1-877 585-9555 ext. 601 – Toll Free (USA & Canada)
1-416 292-0038 ext. 601 – All Other Areas
sales@gaocomm.com

About GAO Comm
GAO Comm (www.GAOComm.com) is an international leading provider of communication test instruments, equipment for the installation, testing and maintenance of communications infrastructures.

Toronto, Canada – GAO Comm (www.GAOComm.com) has launched its full-featured digital transmission system test device – E1/Datacom tester featuring a handheld design, smart navigation mode display and high resolution backlight LCD. This datacom tester is designed for the installation, testing, acceptance and daily maintenance of digital networks and is able to perform channel tests, alarm analysis, fault location and signal analysis. In addition, this tester provides various protocol converters with one-way and bi-directional bit-error-rate (BER) test functions. These capabilities make it ideal for field use.
This portable E1/datacom tester, model 5854, offers a number of practical functions such as frame data control and monitoring, time slot activity monitoring, handshaking signal control and monitoring, APS delay measurements and frequency measurements. Equipped with built-in NiMH rechargeable batteries and a smart charger circuit, the multifunctional tester can work continuously for up to six hours on a single charge and is charged with an automobile battery adapter. It saves and recalls up to 10 user-defined setups and 10 sets of results. Its software is easily upgraded via an integrated RS232C interface. Test results can be uploaded, conserved and printed using Test Manager Software.
Please visit http://www.GAOComm.com for more information or purchase this product online.
For any sales inquires please contact:
1-877 585-9555 ext. 601 – Toll Free (USA & Canada)
1-416 292-0038 ext. 601 – All Other Areas
sales@gaocomm.com

About GAO Comm
GAO Comm (www.GAOComm.com) is an international leading provider of communication test instruments, equipment for the installation, testing and maintenance of communications infrastructures.

Gao Comm

Normal 0 7.8 磅 0 2 false false false EN-US ZH-CN X-NONE MicrosoftInternetExplorer4
/* Style Definitions */ table.MsoNormalTable {mso-style-name:普通表格; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:”"; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.5pt; mso-bidi-font-size:11.0pt; font-family:”Calibri”,”sans-serif”; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:宋体; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:”Times New Roman”; mso-bidi-theme-font:minor-bidi; mso-font-kerning:1.0pt;}

Toronto, Canada - GAO Instruments (www.GAOInstruments.com) is offering its E1/Datacom tester intended for the installation, acceptance testing and daily maintenance of digital networks. The E1/Datacom tester performs channel tests, alarm analysis, signal analysis and fault location and provides various protocol converters with one-way and bi-directional bit-error-rate (BER) test functions.

This portable E1/Datacom tester, model A0300021, features a rugged, handheld design, a high resolution backlit LCD screen and simple operation.It offers such functions as in-service framed and unframed testing, CAS and CCS signaling generation and monitoring, extensive error and alarm generation, detection and indication. The tester saves and recalls ten user-defined setups and ten sets of results, which can be uploaded and printed via Test Manager Software. Its embedded software can be upgraded via an integrated RS232 interface. It works continuously for up to six hours on a single charge with built-in rechargeable batteries and can be charged via a battery adapter. In addition, this tester runs under Windows 98, ME, 2000, XP and NT operation systems.

Please visit http://www.GAOInstruments.com for more information or to purchase this product online.
For any sales inquires please contact:
1-877 585-9555 ext. 601 -Toll Free (USA & Canada)
1-416 292-0038 ext. 601 - All Other Areas
sales@gaoinstruments.com
About GAO Instruments

GAO Instruments (www.GAOInstruments.com) is a global leader in research, development and manufacturing of high performance telecommunication testers, electronic measurement instruments and other test and measurement devices.

Normal 0 7.8 磅 0 2 false false false EN-US ZH-CN X-NONE MicrosoftInternetExplorer4
/* Style Definitions */ table.MsoNormalTable {mso-style-name:普通表格; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:”"; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.5pt; mso-bidi-font-size:11.0pt; font-family:”Calibri”,”sans-serif”; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:宋体; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:”Times New Roman”; mso-bidi-theme-font:minor-bidi; mso-font-kerning:1.0pt;}

Toronto, Canada - GAO Instruments (www.GAOInstruments.com) is offering its E1/Datacom tester intended for the installation, acceptance testing and daily maintenance of digital networks. The E1/Datacom tester performs channel tests, alarm analysis, signal analysis and fault location and provides various protocol converters with one-way and bi-directional bit-error-rate (BER) test functions.

This portable E1/Datacom tester, model A0300021, features a rugged, handheld design, a high resolution backlit LCD screen and simple operation.It offers such functions as in-service framed and unframed testing, CAS and CCS signaling generation and monitoring, extensive error and alarm generation, detection and indication. The tester saves and recalls ten user-defined setups and ten sets of results, which can be uploaded and printed via Test Manager Software. Its embedded software can be upgraded via an integrated RS232 interface. It works continuously for up to six hours on a single charge with built-in rechargeable batteries and can be charged via a battery adapter. In addition, this tester runs under Windows 98, ME, 2000, XP and NT operation systems.

Please visit http://www.GAOInstruments.com for more information or to purchase this product online.
For any sales inquires please contact:
1-877 585-9555 ext. 601 -Toll Free (USA & Canada)
1-416 292-0038 ext. 601 - All Other Areas
sales@gaoinstruments.com
About GAO Instruments

GAO Instruments (www.GAOInstruments.com) is a global leader in research, development and manufacturing of high performance telecommunication testers, electronic measurement instruments and other test and measurement devices.

GAOInstruments